Skip to content
Illustration of a double-height family home hallway with an oak staircase

Guide, updated 17 November 2026

Marble polishing in Dubai

Marble polishing in Dubai covers four different jobs, and the damage decides which one your floor needs. Polishing powder and crystallisation bring the gloss back on smooth stone. Diamond honing cuts out acid etching and scratches. Grinding flattens tiles whose edges stand proud. Stains, cracks and hollow tiles need other repairs before any of the four.

Dubai Renovations does not polish floors or sign the contract. A partner contractor inspects the stone, quotes and signs with you.

How much does marble polishing cost in Dubai?

HFT Dubai lists basic marble polishing at AED 15 to 25 per m² and deep grinding and restoration at AED 30 to 50. NPSM Restoration Services (floorpolishing.ae) prices a full restoration, with old grout removed and cracks filled, at AED 80 to 120 for floors of 100 m² and more. Bestimate's indicative 2026 benchmark is AED 25 to 75+ per m².

On this page
  1. Why your marble looks dull, scratched or uneven
  2. Polishing powder, crystallisation or diamonds: what each one does
  3. Which polishing method fixes which damage
  4. Is marble crystallisation good or bad for your floor?
  5. How a professional marble polishing job runs
  6. Sealing marble, and the water test that tells you when
  7. What damages marble: cleaners, acids and sand
  8. How much does marble polishing cost in Dubai?
  9. When marble repair or replacement is the right call
  10. What to ask before you sign
  11. Questions

Why your marble looks dull, scratched or uneven

Look at the floor in low side light before anyone quotes. Marble is a calcareous stone, made mainly of calcium carbonate, and the Natural Stone Institute warns that calcium carbonate is sensitive to acid. Each mark below calls for a different fix, and a quote that names one method for all of them is pricing the wrong job.

What the marks on a marble floor mean, and what fixes them
What you seeWhat it isWhat fixes it
Dull rings or spots where a drink, perfume or cleaner satEtching: acid has eaten the polished facePolishing powder on light etches; diamond honing on deeper ones
A matt lane from the door to the kitchen, glossy under the sofaWear from grit underfootPolishing powder or crystallisation if it feels smooth; honing if it does not
Fine lines you can feel with a fingernailScratchesDiamond honing; the Natural Stone Institute buffs only slight ones with dry 0000 steel wool
A tile edge standing above its neighbourLippageDiamond grinding to one flat surface, then honing and polishing
A dark patch, or an orange-brown mark near metalAn oil stain, or iron or rustA poultice; deep-seated rust can be permanent
A white powder that comes back after wipingEfflorescence: salts carried up by waterFind the moisture first; polishing does not touch it
Cracks, or tiles that sound hollow when tappedA tiling defectRe-fix or replace the tile before any machine runs over it

Etching and wear take gloss off; scratches and lippage take flatness off; stains, salts and hollow tiles are not polishing jobs at all.

Polishing powder, crystallisation or diamonds: what each one does

Three processes get called polishing, and the makers' sheets say what each can reach. All three work only on calcium-based stone. Lithofin rules its powder out for granite, quartzite and artificial stone, and Kärcher sells its crystalliser for calcareous floors. Porcelain made to look like marble is not calcium-based, so confirm the floor is real stone first.

Polishing powder works on the surface. Lithofin's MPP is oxalates with additives that change the calcium at the face so it takes a polish, worked under a 40 to 50 kg single-disc machine with a white nylon pad. Lithofin says it works best on a surface already brought to a 300 to 400 grit finish, and that deep scratches cannot be removed with it.

Crystallisation is a chemical polish. AKEMI's Finish-Crystallizer AK 2 is a fluorosilicate liquid of about pH 2, worked in with a fine steel wool pad under a heavy, slow single-disc machine. Kärcher's RM 775 powder reads pH 1 in concentrate, and Kärcher says heavy wear and scratches should be fine ground before it goes on.

Diamond honing cuts the stone itself. The pads run wet from coarse to fine, each one taking out the scratches of the last, so etching and scratches leave with the layer they sit in. AKEMI notes that a floor ground to 800 grit is smooth enough to finish with a plastic pad instead of steel wool.

Illustration of a renovated Dubai villa living room opening onto a palm garden

Which polishing method fixes which damage

Match the damage you found to the method that can reach it. A method that cannot reach the damage leaves it under a fresh shine.

The three ways to polish marble, from the makers' data sheets
MethodWhat it fixesWhat it cannot fix
Polishing powder (Lithofin MPP)Dull patches and worn-off polish on smooth stoneDeep scratches; granite, quartzite and artificial stone
Crystallisation (AKEMI AK 2, Kärcher RM 775)Gloss on traffic-dulled marble that is still flatHeavy wear and scratches, which Kärcher says to grind first
Diamond honing and grindingEtching, scratches and lippage, by cutting below themCracks, hollow tiles, efflorescence and deep-seated rust

Is marble crystallisation good or bad for your floor?

AKEMI says crystallisation reaches very good durability after 3 to 4 months on surfaces under heavy wear, such as hotel entrances, and should be re-applied after 6 months at the latest. Plan on renewing it at least twice a year.

The chemistry sets the precautions. The products are acidic, AKEMI warns that metal objects can react and discolour, and its sheet says dirt can collect in scratches and deep joints during the process and has to be cleaned out separately. Kärcher's label carries a warning for serious eye damage. Door thresholds, brass strips and skirting all need masking.

Wet rooms need a separate answer. Part K of the Dubai Building Code asks for villa shower floors and other fixture floors to be non-slip. AKEMI claims its crystalliser reduces the hazard of slipping but gives no slip figure, so ask the contractor in writing how a treated shower floor will meet the code before any gloss goes on it.

Check whether a quote includes it. NPSM Restoration Services, one Dubai firm whose rate card is in the price table below, lists crystallisation with steel wool in all four of its packages, from a basic polish to a full restoration. If you want a honed or diamond-polished finish without it, say so in writing.

How a professional marble polishing job runs

Repairs come before grinding, grinding before honing, and the sealer goes on last, onto clean dry stone. Lithofin has its powder worked in sections of no more than 10 to 15 m² at a time, and AKEMI its crystalliser in 2 to 3 m², so a large villa floor is worked in many small passes.

Wet slurry and acidic polish both travel. Lithofin says wood, parquet and carpets must be protected from splashes, and AKEMI asks for anything not being treated, furniture included, to be covered or masked first. What that means in a villa:

  • Furniture out of the rooms being worked, with felt pads ready for when it goes back
  • Skirting, door frames, kitchen plinths and wooden stair treads taped and sheeted
  • Cracked and hollow tiles re-fixed, and failed grout raked out, before the first pass
  • A sample area polished first, as both AKEMI and Bestimate advise, so you approve the sheen before the whole floor
  • Slurry vacuumed between passes and rinsed off at the end, before it dries in the joints
  • Stairs, skirting and borders measured and priced separately from the open floor, as Bestimate suggests

Approve a sample area, and make sure the quote names the protection as well as the polish.

Illustration of a floating travertine staircase with a bronze handrail
Illustration of travertine, oak and terrazzo flooring samples laid on concrete

Sealing marble, and the water test that tells you when

A sealer slows staining and leaves etching untouched. The Natural Stone Institute says the products sold as sealers are impregnators that act as a repellent and make stone more stain resistant, not stain proof. Galen Roth, quoted on the Institute's Use Natural Stone site, says a true sealer does nothing to protect against etching, however much is applied.

FILA's MP90 Eco Xtreme, a water-based impregnator, shows what to expect on site. FILA gives a coverage of 20 to 30 m² per litre on polished marble, foot traffic after 2 hours at 20 °C, and repellency after 24 hours. Being water-based, it can go on 24 to 48 hours after the floor is washed. Its own label says it does not protect against acid.

To check whether a floor needs sealing, use LATICRETE's water test. On a clean, dry spot free of wax, put down a drop of water about 25 mm across and leave it for 5 to 30 minutes. If it soaks in and darkens the stone, the surface is absorbing. If it beads, the stone is sealed or very dense. Test the entrance and the kitchen, where wear is heaviest.

What damages marble: cleaners, acids and sand

Start with the cleaning cupboard. The Natural Stone Institute warns that products containing lemon, vinegar or other acids may dull or etch calcareous stone, that scouring powders and creams may scratch it, and that many rust removers and toilet bowl cleaners contain traces of hydrofluoric acid, which attacks every stone. Read the bathroom bottles before they go near the floor.

One common bottle shows why. The UK safety data sheet for Harpic Power Plus Original lists 9 g of hydrochloric acid in every 100 g of liquid. Formulas differ between markets, so check the label on the bottle you own, but a toilet cleaner that drips onto a marble bathroom floor is an acid on calcium carbonate.

Grit is the other cause the Institute names. On the US National Park Service's Mohs table, quartz rates 7 and calcite, the mineral marble is made of, rates 3. Any quartz grain under a shoe is harder than the floor it is walked across. The Institute's routine for keeping it off:

  • Mats or rugs both inside and outside each entrance, with slip-resistant backing
  • A dry, untreated dust mop, used often, before any wet mop
  • Vacuum wheels and attachments checked for wear, since worn ones scratch
  • Washing with a neutral cleaner, stone soap or a mild liquid dishwashing detergent, then a rinse and a dry
  • Ammonia only now and then, because the Institute says frequent use may dull some stone
  • Spills blotted, not wiped, then flushed with water and mild soap

How much does marble polishing cost in Dubai?

The rate depends on which of the four jobs is being priced, and the three publishers in the table each cut it differently. HFT Dubai lists basic polishing at AED 15 to 25 per m² and deep grinding and restoration at AED 30 to 50, with etch mark removal and sealing priced as separate lines. It adds that small areas, under 20 m², may carry a minimum call charge.

NPSM Restoration Services prices by package for floors of 100 m² and more. Its standard polish and seal, at AED 30 to 50 per m², includes preliminary grinding for lippage. Its full restoration, at AED 80 to 120, adds removing old grout and filling cracks and holes. So restoration can mean either figure, depending on whether grout and cracks are in it.

Bestimate, a Dubai quote-comparison platform, gives an indicative 2026 benchmark of AED 25 to 75+ per m². It names marble condition, grinding, crystallisation, sealing and furniture moving as what moves the price. HFT Dubai prices a honed finish slightly below a high gloss and adds 10% to 20% for crystallisation.

None of these is a Dubai Renovations price. VAT at 5% applies under the Ministry of Finance's rules, so ask whether a quote includes it.

When marble repair or replacement is the right call

Some floors are past polishing. The Natural Stone Institute says deep-seated rust stains are extremely difficult to remove and the stone may be permanently stained. It also says efflorescence that keeps returning means water is rising through the stone from below, and the installer needs to find the cause; polishing the surface will not stop it.

Cracked and hollow tiles are tiling work. When only a few need lifting, the flooring company in Dubai page covers the adhesive and screed questions for re-fixing. On a marble bathroom floor, the bathroom renovation page covers the waterproofing that sits under the tiles.

When the whole floor is going, it is usually one part of a bigger job. The villa renovation cost guide shows where flooring sits in a villa budget, and the interior renovation in Dubai page covers floors alongside ceilings, joinery and lighting.

What to ask before you sign

When you are ready for an inspection, the villa renovation and flooring pages explain how we match you with a partner contractor. Put the same questions to every firm, in writing, and compare the answers rather than the totals:

  • Which method, in plain words: powder polish, crystallisation, diamond honing, or grinding then honing?
  • If diamonds, which grit do you start at and which do you finish at?
  • Is crystallisation included, and can it be left out, on the shower floor above all?
  • Which sealer, how many coats, and when can rugs and furniture go back?
  • Are stairs, skirting and borders measured separately, and is there a minimum charge?
  • Who moves furniture, and what is masked or sheeted?
  • Which tiles will be re-fixed before polishing, and is that priced?
  • Is the 5% VAT included in the price?

Published prices and their sources

ItemPublished rangeSource
Basic marble polishingAED 15 to 25 per m²HFT Dubai, a polishing firm's own price list, per square metre; a minimum call charge may apply under 20 m²; page dated 29 July 2025, accessed 2026-11-01
Deep grinding and restorationAED 30 to 50 per m²HFT Dubai, per square metre; the same page's summary calls this tier deep restoration plus sealing; page dated 29 July 2025, accessed 2026-11-01
Etch mark removalAED 20 to 35 per m²HFT Dubai, per square metre, listed as its own service; page dated 29 July 2025, accessed 2026-11-01
Marble sealing, added to a polishAED 5 to 10 per m²HFT Dubai, optional add-on after polishing, per square metre; page dated 29 July 2025, accessed 2026-11-01
Basic polishAED 20 to 25 per m²NPSM Restoration Services (floorpolishing.ae), powder polishing, rinse with neutral stone soap and crystallisation with steel wool; standard rate for 100 m² and above; page updated 27 October 2026, accessed 2026-11-01
Standard polish and sealAED 30 to 50 per m²NPSM Restoration Services (floorpolishing.ae), preliminary grinding for lippage, powder polishing, crystallisation and a sealer on the grout; for floors without grout damage; 100 m² and above; page updated 27 October 2026, accessed 2026-11-01
Full restorationAED 80 to 120 per m²NPSM Restoration Services (floorpolishing.ae), old grout removed, cracks and holes filled, grinding, powder polishing, crystallisation and sealer; 100 m² and above; page updated 27 October 2026, accessed 2026-11-01
Marble polishing, any scopeAED 25 to 75+ per m²Bestimate, indicative 2026 benchmark, not a quote; moves with marble condition, grinding, crystallisation, sealing and furniture moving; no page date shown, accessed 2026-11-01

Questions

How do you polish worn marble?

Match the method to the wear. If the dull lane still feels smooth, polishing powder or crystallisation brings the gloss back; Lithofin says its powder cannot remove deep scratches. If you can feel scratches or see etch rings, the floor needs diamond honing through finer and finer grits before it is polished.

Is marble restoration expensive?

It depends on what restoration includes. HFT Dubai lists deep grinding and restoration at AED 30 to 50 per m², while NPSM Restoration Services charges AED 80 to 120 per m² for a full restoration that also removes old grout and fills cracks and holes, on floors of 100 m² and more.

What should you not clean marble with?

Anything with lemon, vinegar or another acid, which the Natural Stone Institute says may dull or etch marble, and scouring powders or creams, which may scratch it. It also warns that many toilet bowl cleaners and rust removers contain hydrofluoric acid. Use a neutral cleaner, stone soap or mild dish detergent instead.

Can you use Dawn dish soap on marble floors?

A mild liquid dishwashing detergent in warm water is on the Natural Stone Institute's list of safe cleaners for stone. Use only a little, because the Institute says too much soap leaves a film and streaks, then rinse the floor thoroughly and dry it with a soft cloth.

Can I use Harpic on a marble floor?

Keep it off. The UK safety data sheet for Harpic Power Plus Original lists 9 g of hydrochloric acid per 100 g of liquid, and the Natural Stone Institute warns that acids etch calcareous stone such as marble. Formulas vary between markets, so read the label on your bottle.

How do you get etch marks out of marble?

The Natural Stone Institute's method for a light etch is marble polishing powder rubbed in on wet stone with a damp cloth or a buffing pad on a low-speed drill until the mark goes. Etches it cannot lift need a professional to hone and repolish the area.

Does sealing marble stop etching?

No. Sealers sold for stone are impregnators that make it more stain resistant, the Natural Stone Institute says, and FILA's label for its MP90 Eco Xtreme states that it does not protect against acid. Etching is prevented by wiping spills quickly and keeping acids off the stone.

Who signs the marble polishing contract?

The partner contractor, who does the work and gives any guarantee. Dubai Renovations is not a party to the contract, the payments or the guarantee.