Skip to content
Illustration of a villa kitchen with a long stone island and oak cabinetry

Guide, updated 12 November 2026

Kitchen cabinets in Dubai

Kitchen cabinets in Dubai last when the boxes are cut from a board graded for humid conditions, the doors suit how hard your kitchen works, and the quote names the hinges and runners. Settle those three before you choose a colour, and the quotes you collect will price the same cabinets.

Dubai Renovations does not make or sell cabinets and does not sign contracts. A partner contractor visits, measures, quotes in writing and signs the contract with you.

How much do kitchen cabinets cost in Dubai?

Bestimate, a Dubai quote-comparison platform, puts modular cabinets at AED 8,000 to 18,000, semi-custom MDF or lacquer cabinets at AED 18,000 to 40,000, and custom joinery at AED 40,000 to 100,000+ (June 2026). The worktop, appliances, plumbing and VAT are separate lines.

On this page
  1. What is a kitchen cabinet made of?
  2. Why the board inside matters more than the door
  3. Which board goes where in the kitchen?
  4. What does Dubai's building code say about cabinet boards?
  5. How do the door finishes compare?
  6. Which colours and finishes show marks?
  7. Hinges and drawer runners: the parts you use every day
  8. Should you replace, reface or wrap your cabinets?
  9. How cabinets are measured, made and fitted
  10. What a joinery quote should list
  11. Questions

What is a kitchen cabinet made of?

Four parts, and a quote you can compare prices each one. Much of a kitchen renovation in Dubai budget goes here: Bestimate says cabinets are usually one of the largest parts of the budget.

  • The carcass: the box, with its sides, base, shelves and back panel, cut from a wood-based board
  • The fronts: doors, drawer fronts and the end panels you see
  • The hardware: hinges, drawer runners, lift mechanisms and handles
  • The plinth: the strip under the base units, at floor level where the mop goes

Why the board inside matters more than the door

Water reaches the carcass before anyone sees it: at the sink base, beside the dishwasher, along the plinth. Board makers grade their boards for this.

For MDF, Alfa Wood's data sheet draws the line. Standard MDF is for dry conditions, where relative humidity goes above 65% for no more than a few weeks a year. The humid grade, MDF.H, is for conditions that reach up to 85% for a few weeks a year.

The gap shows in a water test. Finsa soaks its boards for 24 hours under EN 317. In the 12 to 19 mm range, its standard Fibrapan MDF lists 12% thickness swelling and its Fibrapan H, an MDF.H board, lists 8%.

Particleboard splits the same way. EN 312 puts boards for interior fitments and furniture in dry conditions in type P2, and non-load-bearing boards for humid conditions in type P3.

A lacquered face does not change the core. Egger's data sheet for its PerfectSense lacquered boards says they are made on Egger MDF core boards, and that their mechanical properties and formaldehyde emissions come from that core and its thickness.

Ask for the board type in writing for each cabinet: MDF.H or P3 where water reaches it.

Illustration of cabinet door samples, worktop offcuts and hinges on a workshop table

Which board goes where in the kitchen?

Not every cabinet needs the humid grade. Ask the joiner about each group:

Where water reaches each cabinet, and the board to ask about
CabinetWhat reaches itBoard to ask about
Sink baseSplashes, a dripping trap, wet clothsMDF.H or P3, with every cut edge sealed
Dishwasher sides and the panel above itSteam each time the door opensMDF.H or P3
PlinthThe mop and any floor leakA humid-grade board, or a plinth that is not wood-based
Wall cabinets over the hobHeat and cooking steamThe board, and how its edges are banded
Tall units and wall cabinets away from waterRoom airStandard MDF or P2 can be enough

A villa closed up with the AC off during a summer trip drifts toward Dubai's outdoor air, which Table K.30 of the Dubai Building Code lists at up to 100% relative humidity, noting that heavy condensation also prevails.

What does Dubai's building code say about cabinet boards?

Three clauses of the Dubai Building Code touch what a cabinet is made from. Part K is the code's own part for villas and townhouses; Parts B and H govern other buildings, such as towers.

  • Villas and townhouses: adhesives and sealants must not exceed the volatile organic compound limits set by Dubai Central Laboratory, and must be certified by it or another laboratory the Authority approves (K.10.1.6.3)
  • Other buildings: for composite timber products used inside, the share of added urea-formaldehyde resin must stay within the limit the Authority sets (B.10.6.5)
  • Other buildings: formaldehyde in indoor air must stay below 0.08 ppm in the air quality test carried out before occupancy (H.4.10.3 and Table H.4)

Ask for each board's formaldehyde class and test report. Finsa, for one, reports 0.05 ppm or less under EN 717-1 for both its MDF boards, which it calls class E1.

How do the door finishes compare?

The door takes the knocks, the oven's heat and the kettle's steam. Makers publish the tests that matter, most of them from EN 438-2:

Door finishes and their makers' published tests
Door finishWhat it isPublished test
Melamine-faced boardThe board with a factory decor surface, sold with colour-matched edge banding (Alfa Wood)Read the maker's sheet for the exact board
High-pressure laminate (HPL)Layers of paper impregnated with thermosetting resins and cured under heat and high pressure (Polyrey)Polyrey's compact HPL: dry heat at 180°C and wet heat at 100°C, gloss rated grade 3 or better, other finishes grade 4 or better
UV-lacquered MDF, gloss or mattA cured lacquer coating on an MDF core (Egger PerfectSense)Dry heat at 160°C and wet heat at 100°C, grade 4 or better; 14 days at 40°C and 85% humidity with no gaps or broken edges
Acrylic, veneer or painted doorsSeveral different products sold under each nameAsk for the maker's data sheet with the same heat and steam tests

Polyrey adds that its panels must not be exposed to moisture continuously or sit in direct contact with water, and must be able to dry at regular intervals.

Illustration of new kitchen base cabinets fitted before the worktop goes on
Illustration of a quartz worktop edge with an undermount sink and oak drawers

Which colours and finishes show marks?

Dark and matt together. Polyrey warns that matt surfaces combined with dark decors can leave visible marks and are more sensitive to soiling, and it recommends light decors for intensive use.

Gloss shows something else. Egger's sheet permits slight gloss changes on gloss surfaces after its heat tests, and rates steam resistance at grade 3 or better for Premium Gloss against grade 5 or better for Premium Matt. Put the doors beside the hob and over the dishwasher in the finish that rates best for steam.

Hinges and drawer runners: the parts you use every day

A sagging door or a dropping pan drawer is usually the hardware, not the board. Ask for the maker and model of each, in writing.

Blum, a cabinet hardware maker, says its tests on hinges comprise 200,000 opening and closing cycles, and that it puts its fittings through heat, water and salt exposure. Its MOVENTO full-extension runners come in 40 kg and 70 kg load classes, with BLUMOTION soft-close.

Match the load class to the drawer: pan drawers need the heavier class, a cutlery drawer does not. Full extension, in Blum's words, gives full access to the very back of drawers.

Should you replace, reface or wrap your cabinets?

It depends on the boxes. Replace them when the board has swollen at the sink or dishwasher, the wall cabinets are loose, or the sink, hob or fridge has to move. Keep them and change the fronts when the boxes are dry, square and firm.

Film over sound doors is the lightest option. The kitchen wrapping guide covers when film suits a door, with Bestimate's published ranges for wrapping, new doors and new cabinets side by side.

If the layout is changing too, start with kitchen design in Dubai. The cabinet plan follows where the sink, hob, hood and appliances go.

How cabinets are measured, made and fitted

On a Dubai Renovations enquiry, a partner contractor visits and measures the kitchen before quoting in writing. Made-to-measure cabinets are produced after the final measurements, and a stone worktop is usually templated once the base units are fitted.

So the old kitchen often comes out well before the new one is ready. Ask the partner for the programme and plan how you will cook in the meantime.

Approvals come first. Wait for building management or the community to approve the work before anything is removed. The guide to renovation approvals in Dubai shows who issues which approval.

What a joinery quote should list

The kitchen renovation cost in Dubai guide covers the whole budget. For the cabinets alone, a quote you can compare names each item below or says it is excluded.

Check who you are signing with as well: the guide to checking a renovation contractor in Dubai covers the licence and register search.

  • The board type and grade for each group of cabinets (MDF, MDF.H, P2 or P3) and its formaldehyde class
  • The door material, finish and product name, and the finish on the end panels
  • Edge banding on every exposed edge, and sealed cut edges inside the sink base
  • Hinge and runner maker and model, soft-close, and each runner's load class
  • Internal fittings (corner units, pull-outs, bins) and the handles or handle-free profile
  • The plinth material, fixed so it can come off for access to pipes
  • Measuring, delivery, fitting and removal of the old units, each as its own line
  • Whether VAT is included: the UAE has charged it at a standard rate of 5% since 1 January 2018

Published prices and their sources

ItemPublished rangeSource
Modular cabinetsAED 8,000 to 18,000Bestimate, cabinets only, standard sizes and finishes, the publisher's fastest option; page last updated June 2026, under its heading 3, Cabinet type and material, accessed 2026-11-12
Semi-custom MDF or lacquer cabinetsAED 18,000 to 40,000Bestimate, cabinets only, more finish control and better fit; page last updated June 2026, under its heading 3, Cabinet type and material, accessed 2026-11-12
Custom joineryAED 40,000 to 100,000+Bestimate, cabinets only, premium fit, hardware and detailing; page last updated June 2026, under its heading 3, Cabinet type and material, accessed 2026-11-12

Questions

What are the three grades of kitchen cabinets?

In Bestimate's Dubai price table they are modular cabinets in standard sizes and finishes at AED 8,000 to 18,000, semi-custom MDF or lacquer cabinets at AED 18,000 to 40,000, and custom joinery at AED 40,000 to 100,000+. Each step buys more control over the finish and the fit.

What are the two main types of kitchen cabinets?

Base cabinets, which stand on the floor and carry the worktop, and wall cabinets, hung above it. Tall units, such as a pantry, are often counted as a third group.

What colours should you avoid on kitchen cabinets?

Dark matt finishes on the doors handled most. Polyrey, a laminate maker, warns that matt surfaces with dark decors show marks and soil more easily, and recommends light decors for heavy use.

Should kitchen cabinets go to the ceiling?

Full-height wall cabinets add storage and leave no top ledge to gather dust, but the top shelf needs a step. Check first where the hood duct, any AC grille and any ceiling access panel sit, because full-height units can cover them.

Is it cheaper to reface or replace kitchen cabinets?

Refacing usually costs less when the boxes are sound, because the boxes stay. Bestimate's range for new modular cabinets starts at AED 8,000, and the kitchen wrapping guide sets its ranges for wrapping and new doors beside that figure.

What is the most expensive part of redoing a kitchen?

Often the cabinets, which Bestimate calls usually one of the largest parts of the budget. Moving the sink, hob or gas point can add more, because it brings drainage, plumbing, electrical and approval work.